C2 Vertical Safety

Vulcanus 10.5mm, linear metre

Teufelberger Vulcanus is a heat-resistant rope for demanding work near heat sources and sharp edges. With a polyamide core, aramid sheath, and EN 1891 certification, it offers high strength, low elongation, and increased resistance to abrasion and cutting.

Vulcanus is developed for use where standard polyamide or polyester ropes may be exposed to higher heat loads. The aramid sheath has high heat resistance and a high decomposition point of up to 500 °C, while the rope retains good strength and has minimal stretch. This makes Vulcanus suitable as a work rope or positioning rope, even during repeated rapid descents in rescue and operational environments.

Areas of use

The rope is used when working near heat sources and in environments with sharp edges where abrasion resistance is crucial. It is also suitable for work positioning, as well as in rescue services and special units, where reliable equipment is required for fast and repeated descents.

Specifications

• Type: Heat-resistant rope
• Certification 9 mm: EN 1891 B
• Certification 10.5 mm: EN 1891 A
• Core: Polyamide
• Mantel: Aramid
• Decomposition point: Up to 500 °C

ATTENTION! There is an additional cost for rope cutting. Add the item "Rope cutting" located under compatible accessories, one per rope you wish to cut.

FAQ

Teufelberger Vulcanus is particularly good for

Vulcanus is a good choice when working near heat, sharp edges, and in environments where the rope needs high resistance to abrasion and cutting.

Is Vulcanus certified as work equipment?

Yes. Vulcanus is certified according to EN 1891 B in 9 mm and EN 1891 A in 10.5 mm.

Why does the rope have an aramid sheath?

Aramid offers high heat resistance, high strength, and low elongation compared to common materials such as polyester and polyamide.